상품상세

0

[CROWN] XTi 4002 l 2채널, 4옴 1200W 파워앰프, 테크데이타 정품

상품 옵션
판매가격
2,600,000원
      총 상품 금액 0 원

      ▶ 제품특성

      XTi2 Series는 Portable PA용으로 디자인되고 만들어진 프로페셔널용 앰프로, 출력파워가 다르다는 것을 제외하고 4모델은 동일한 성능을 갖고 있습니다. XTi 1002, 2002, 4002 그리고 6002 모두 매우 튼튼하면서도 가볍고, 매우 뛰어난 성능을 갖고 있으며, 전면 판낼에 크로스 오버 주파수, EQ, Limiting, Delay 그리고 Subharmonic Synthesizer를  조절할 수 있는 LCD스크린이 있다.

      그 밖에도 전세계적으로 통용 가능한 전원 공급스위치모드, 기능성 인디케이터, 냉각을 돕는 스피드 팬, XLR Inputs, Speakon 그리고 Binding Post 출력장치, 누전방지 등 많은 특징들을 갖고 있습니다.
      게다가 당신의 XTi2에 대한 투자는 Crown의 3년간의 무과실 손해배상의 보증에 의해 지원됩니다.

       

      ▶ 상세스펙

       

      XTi1002

      XTi2002

       XTi4002

      XTi6002

      2Ω Stereo (per ch.)

      700W

      1000W

       1600W

      3000W

      4Ω Stereo (per ch.)

      500W

      800W

      1200W

      2100W

      8Ω Stereo (per ch.)

      275W

      475W

      650W

      1200W

      8Ω Bridge-Mono

      1000W

      1600W

      2400W

      4200W

      4Ω Bridge-Mono

      1400W

      2000W

      3200W

      6000W



      Input EQ

      6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

      Crossover Filters

      Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

      Output EQ

      8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

      Delay

      For signal alignment of driver; 50 mS of total delay.

      SubHarmonic Synth

      Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

      Peakx™ Plus Limiter

      User defeatable limiter that allows users to control Threshold, Attack, and Release times.

      Presets

      50 total presets, 49 of which are user-definable.



      Sensitivity (for full rated power at 4 ohms)

      1.4 Vrms

      Frequency Response (at 1 watt, 20 Hz - 20 kHz)

      +0 dB, –1 dB

      Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms)

      XTi1002/2002/4002: 100 dB (A weighted)
      XTi6002: 103 dB (A weighted)

      Total Harmonic Distortion (THD)

      < 0.5%

      Damping Factor 20 Hz to 1 kHz

      > 500

      Crosstalk (below rated power)

      20 kHz - 1 kHz: > 70 db

      Input Impedance (nominal)

      20k ohms balanced, 10k ohms unbalanced

      Maximum Input Signal

      +22 dBu typical

      AC Line Voltage and Frequency Configurations

      100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

      AC Line Current
      (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)

      XTi1002: 6.8A; no more than 38W at idle
      XTi2002: 8.3A; no more than 38W at idle
      XTi4002: 10.5A; no more than 38W at idle
      XTi6002: 15.3A; no more than 180W at idle

      Operating Temperature

      0°C to 40°C at 95% relative humidity (non-condensing)



      Level

      Two front-panel rotary level controls, one for each channel

      Power Switch

      On/Off switch applies AC power to the amplifier

      Sel/Prev/Next Buttons

      Three buttons near the LCD screen that are used to access menu items and front panel lockout

      LCD Screen

      Backlit liquid crystal display that shows preset and processing status



      Signal Indicator

      Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

      –10 Indicator

      Green LED flashes when output signal exceeds -10 dB below clip.

      –20 Indicator

      Green LED flashes when output signal level exceeds -20 dB below clip.

      Ready Indicator

      Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

      Clip Indicator

      Red LED, one per channel, turns on at the threshold of audible distortion

      Temp Indicator

      Red LED, one per channel, illuminates under excessive temperature conditions

      Power Indicator

      Blue LED illuminates when the amplifier has been turned on and has power



      Chassis

      Steel

      Front Panel

      Cast-aluminum

      Cooling

      Proportional speed fan with front-to-rear airflow.

      Dimensions

      XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D)
      XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D)

      Net Weight

      XTi 1002/2002/4002: 18.5 lbs (8.4kg)
      XTi 6002: 24.0 lbs (10.9kg)

      Shipping Weight

      XTi 1002/2002/4002: 21.5 lbs (9.8kg)
      XTi 6002: 30.0 lbs (13.6kg)

       
      제품의 배송은 결제일로부터 2∼5일 정도 소요됩니다.
      단, 공휴일과 일요일은 배송기간에서 제외됩니다.
      배송이 나간 제품은 주문 배송조회를 이용하여 현재 배송상태를 확인할 수 있습니다.

      무통장입금, 신용카드, 온라인계좌이체, 마일리지결재등 다양한 결재를 지원하며
      신용카드 할부는 50,000원 이상금액에서 가능합니다.
      입금 및 결제 후 24시간 이내에 고객님에게 입금체크 및 메일을 보내드립니다.
      판매하는 모든 제품은 품질에 이상이 발생하여 보증서비스를 받으실 수 있으며 무상수리 보증기간은
      제조사 또는 수입사에서 별도의 기간을 명시하는 경우를 제외한 모든 제품은 구입 일로부터 1년간입니다.
      (일부품목 제외)
      소비자 과실에 의한 제품의 손상이 발생한 경우에는 유상 A/S 처리가 되며
      경우에 따라 A/S가 불가할 수도 있습니다.
      ■ 교환 및 반품(취소)이 가능한 경우
      상품을 공급 받으신 날로부터 7일 이내
      단, 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는
      교환/반품이 불가능합니다.
      공급받으신 상품의 내용이 표시, 광고내용과 다른 경우
      단, 반품시 제품의 포장과 내용물이 온전하여야만 합니다.

      ■ 교환 및 반품(취소)이 불가능한 경우
      사용자의 과실로 인한 물리적 손상으로 상품의 가치가 감소된 경우.
      상품 수령 후 7일 경과 되었을 경우.
      포장이 훼손되어 상품가치가 상실된 경우.
       

      상품문의

      QnA 리스트
      등록된 문의가 없습니다.

      상품리뷰

      review 리스트
      등록된 리뷰가 없습니다.

      상호: 다운음향 | 대표: 김창영 | 사업자등록번호: 408-39-83976 | 통신판매업신고: 광주동구-제141호 | 개인정보 보호 책임자: 김민우

      주소: 광주 광역시 동구 제봉로 203 (대인동 32-7) 다운음향 | TEL: 062-232-8585,062-225-8998,FAX)062-228-6730, 평일 09:00 ~ 18:00 (공휴일,주말휴무) | FAX: 062-228-6730 | E-mail: down6725@daunsound.com

      Copyright (c) All Rights Reserved.

      비밀번호 확인 닫기