K10 features include:  

10” Woofer; 1.75” diaphragm compression driver 
90° Nominal coverage angle 
Maximum SPL 129 dB peak 
1000 watt continuous Class D power modules in all models 
Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output 
Extensive DSP enhances system performance 

DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones. 
Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field. 
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. 
GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
Attractive and professional appearance 
Rugged ABS enclosures 
Functions as a monitor wedge 
16 Gauge powder coated steel grille 
Comfortable ergonomic handles 
35 mm pole sockets with Tilt-Direct™ 
M10 rigging points 
Eye-bold and Yoke Mount accessories available



K Series
 
 
 

SPECIFICATIONS
K8
K10
K12

Configuration
Trapezoidal 2-way
Multipurpose 2-way
Multipurpose 2-way

Transducers
  Low-frequency
  High-frequency

8" cone transducer
1.75" diaphragm compression driver

10" cone transducer
1.75" diaphragm compression driver

12" cone transducer
1.75" diaphragm compression driver

Frequency Response (-6 dB)
66 Hz - 18 kHz
60 Hz - 18 kHz
52 Hz - 18 kHz

Frequency Range (-10 dB)
61 Hz - 20 kHz
56 Hz - 20 kHz
48 Hz - 20 kHz

Nominal Coverage (-6 dB)
105° conical
90° conical
75° conical

Maximum SPL1
127 dB peak
129 dB peak
131 dB peak

Amplifiers

Power Output2
1000 W continuous Class D
(500 W LF, 500 W HF) 
2000 W peak
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak

Input Impedance (ohms)
XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k

Controls
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)

Indicators
Power, Signal A, Signal B, Standby, Limit, Mic

Connectors
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector

Cooling
On demand, 50 mm variable speed fan

Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™

Transducer Protection
Thermal limiting, excursion limiting

AC Power Input
Universal power supply 100-240 VAC, 50 - 60 Hz

AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A

Enclosure

Material
Impact resistant ABS

Finish
Black paint

Grille
Rugged Powder-Coated Steel Grille

Dimensions (HWD)
17.7" x 11" x 10.6"
450 mm x 280 mm x 269 mm
20.4" x 12.6" x 11.8"
519 mm x 320 mm x 300 mm
23.7" x 14" x 14"
603 mm x 356 mm x 356 mm

Weight (Net)
27 lb / 12.2 kg
32 lb / 14.5 kg
41 lb / 18.6 kg

Available Accessories
K8 TOTE, K8 YOKE, M10 Kit-C
K10 TOTE, K10 YOKE, M10 Kit-C
K12 TOTE, K12 YOKE, M10 Kit-C






K Series
 

SPECIFICATIONS
KSub

Configuration
4th Order Bandpass

Transducers
  Low-frequency

2 x 12" cone transducers

Frequency Response (-6 dB)
48 Hz - 134 Hz

Frequency Range (-10 dB)
44 Hz - 148 Hz

Maximum SPL1
130 dB peak

Amplifiers

Power Output2
1000 W continuous Class D (2x500 W) 
2000 W peak

Input Impedance (ohms)
XLR / ¼": 40k balanced / 20k unbalanced

Controls
Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)

Indicators
Power, Signal, Standby, Limit

Connectors
Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector

Cooling
On demand, 50 mm variable speed fan

Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™

Transducer Protection
Thermal limiting, excursion limiting

AC Power Input
Universal power supply 100 - 240 VAC, 50 - 60 Hz

AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A

Enclosure

Material
Painted birch plywood

Finish
Black textured paint

Dimensions (HWD)
26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm

Weight (Net)
74 lb / 33.6 kg

Available Accessories
KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power. 

2 Independent of limiters and driver protection circuits. 

All Specifications Subject to Change Without Notice.